What are the engine bearings called?
The engine is the heart of the car, continuously powering other components. In the past, sliding bearings dominated the internal bearings. At present, most of them use sealed ball bearings under the premise of improving bearing performance. The following is a detailed description of the phenomenon and judgment method of automobile bearing damage based on the understanding of the engine by the engine bearing manufacturer, hoping to help everyone.

The phenomenon and judgment method of automobile bearing damage
The phenomenon of car bearing damage is mainly manifested in the car. During the driving process, the wheels will shake, and the whole car will shake more violently, often accompanied by strange noises, and rolling often has a sense of frustration, especially when the speed is increased, the noise will become larger, etc.

The engine bearing manufacturer describes the method of judging the damage to automobile wheel bearings:
1. Check the wheels: The owner can choose to quickly turn the 4 wheels in turn by hand. If there is a problem with the axle, it will make a strange noise.
2. Check the temperature: If the brake shoe gap is normal, the temperature of the front and rear wheels of the car is generally different. For example, the temperature of the front wheels will be higher and the temperature of the rear wheels will be lower.
3. Listen to the sound: After the car owner sets the car on fire, observe whether there is a strange sound from the engine. If there is no strange sound when you choose to slide into neutral, you can naturally judge that the wheel bearing of the car has appeared. caused by the problem.

How much does it cost to replace a bearing in an engine?
In life, the number of cars is increasing, and the demand for wheel hub bearings on cars is also increasing. Correct installation of car wheel bearings can increase the safety factor of cars. Excessive wear and bearing damage will bring certain hidden dangers to driving safety if not replaced in time. Car bearings vary in price depending on the model, and the average cost to replace a connecting rod bearing is $10 to $5,000, depending on the manufacturer you choose and the quality of the product.

The role of automobile bearings:
1. It is to keep the shock absorber rotating with the wheels when the vehicle is turning, to maintain the flexibility of steering;
2. The automobile bearing is a pressure bearing whose outer ring is made of rubber, which can maintain the soft connection between the body and the shock absorber and reduce vibration when the road surface is uneven;
3. During the driving process of the car, the unevenness of the road surface often causes the pressure bearing to crack and damage, so that the front part will make a "banging" sound when driving on the bumpy road surface, and in severe cases, the wheel alignment will be misaligned.

Editor's summary: After reading the above introduction, I believe that everyone has a further understanding of engine bearings. For more information, please continue to pay attention to our website, and we will present more exciting content for you in the future.